All Issue

2023 Vol.55, Issue 6 Preview Page

Research Article

The Analysis of the Relationship between Morphological Properties and Surface Profile Parameters of Printing and Writing Paper

인쇄용지 지합과 국부적 표면 특성 간의 상관관계

Ji Min Lee1
,
Yong Ju Lee1
,
Byoung Geun Moon2
,
Hyoung Jin Kim3†
이 지민1
,
이 용주1
,
문 병근2
,
김 형진3†
1Department of Forest Products and Biotechnology, College of Science and Technology, Kookmin University
2Components & Material Division Dept. Distribution & Logistics Technology Center, Korea Conformity Laboratories, Principal Engineer
3Department of Forest Products and Biotechnology, College of Science and Technology, Kookmin University
1국민대학교 과학기술대학 임산생명공학과, 학생
2한국건설생활환경시험연구원 부품소재본부 유통물류기술센터, 수석연구원
3국민대학교 과학기술대학 임산생명공학과, 교수
†Corresponding author: E-Mail: hyjikim@kookmin.ac.kr (Address: Dept. of Forest Products & Biotechnology, College of Science and Technology, Kookmin Univ. Seoul, Republic of Korea)
30 December 2023. pp. 48-58
PDF XML Citation
Abstract

The morphological and surface properties of printing paper are crucial in realizing excellent printability and dimensional stability because an uneven paper surface makes it difficult to achieve uniform color density and can lead to deterioration of the overall properties of the paper. Various measurement methods are available for paper surface analysis. However, indirect and noncontact methods are limited in extracting surface profiles, making accurate surface structure analysis challenging. To date, the average and absolute deviations of the surface roughness and friction obtained using direct measurement methods have been proposed as paper surface profile parameters. However, these parameters do not influence the formation of paper. Conversely, the fractal dimension of surface roughness, which is rooted in self-similarity theory, is a surface property parameter and reflects the surface contour profile. Consequently, the fractal dimension of surface roughness has demonstrated a strong correlation with the formation of paper. Therefore, this study introduces the fractal dimension of surface roughness as a novel parameter for the morphological properties of paper.

Keywords
P&W paper
formation
surface roughness
surface friction
fractal dimension (FD)
mean absolute deviation (MAD)
profilometry
surface profile
parameter
References
1
Kang, K. H. and Kim, H. J., Effects of temperature and relative humidity on the physical properties of electronic P&W paper, Journal of Korea TAPPI 44(3):70-78 (2012). 10.7584/ktappi.2012.44.3.070
2
Park, J. Y., Lee, T. J., and Kim, H. J., Effects of nano-sized calcium carbonate on physical and optical properties of paper, Journal of Korea TAPPI 46(4):1-10 (2014). 10.7584/ktappi.2014.46.4.001
3
Bøhmer, E., Filling and loading, In Pulp and Paper Chemistry and Chemical Technology, Wiley-Interscience Publication 3:1515-1546 (1981).
4
Bown, R., Physical and chemical aspects of the use of fillers in paper, In Paper Chemistry, Blackie Academic & Professional, pp. 194-230 (1996). 10.1007/978-94-011-0605-4_11
5
Choi, K. H., Park, J. E., and Cho, J. H., Evaluation of flocculation property of the pulp slurry influenced by chemical additives using HYSTAP, Journal of Korea TAPPI 50(2):13-19 (2018). 10.7584/JKTAPPI.2018.04.50.2.13
6
Yoon, H. J., Jin, S. M., Choi, I. S., Son, C. M., and Seo, Y. B., Effect of chemical treatment of short fiber fraction of KOCC on formation and bulk of sheet, Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference, pp. 261-266 (2006).
7
Koo, C. W., Park, J. Y., Kim, H. J., and Ha, Y. B., Study on the printing quality depending on the surface roughness of the digital printing paper, Journal of Korea TAPPI 48(4):14-23 (2016). 10.7584/JKTAPPI.2016.08.48.4.14
8
Park, J. M. and Kim, S. B., The variation of offset ink properties according to methyl ester of soy oil and resin molecular weight, Journal of the Korean Graphic Arts Communication Society 29(1):45-59 (2011).
9
Kappel, C., Hirn, U., Donoser, M., and Bauer, W., Measurement of printing ink penetration in uncoated papers and its influence on print quality, Proc. 94th Annual Meeting of Pulp and Paper Technical Association of Canada, pp. 539-542 (2008).
10
Laufmann, M., Calcium carbonate fillers in SC-papers, Wochenblatt für Papierfabrikation 133(11-12):622-641 (2005).
11
Cormier, L., Quantitative mottle measurement based on a physical model of the spatial contrast sensitivity of the human visual system, Fundamental Research Symposium, pp. 1155-1188 (2005).
12
Ha, Y. B., Lee, Y. K., Kim, C. K., Oh, S. S., and Lim, J. H., The effect of ink dispersion and printing conditions on printed mottle, Journal of Korea TAPPI 38(4):41-46 (2006).
13
Ha, Y. B., Lee, Y. K., Kim, C. K., Oh, S. S., Lim, J. H., and Youn, J. T., The study of printed mottle on properties of coated paper and ink dispersion (II) - Analysis of Trial Printing, Journal of Korea TAPPI 39(1):25-29 (2007).
14
Ko, Y. C., Melani, L., Park, N. Y., and Kim, H. J., Surface characterization of paper and paperboard using a stylus contact method, Journal of Nordic Pulp and Paper Research 35(1):78-88 (2020). 10.1515/npprj-2019-0005
15
Land, C., Effect of moisture amount on HSWO waviness (2004).
16
ISO 8791-2, Paper and board - Determination of roughness/smoothness (air leak method) - Part 2 Bendtsen method (2013).
17
ISO 8791-4, Paper and board - Determination of roughness/smoothness (air leak methods) - Part 4 Print-surf method (2007).
18
Lee, Y. J., A Study on the quality characterization of printing & writing paper using surface parameters and data mining techniques, Master thesis, Kookmin University, Korea (2022).
19
Jeong, H. S., Ko, Y. C., and Kim, H. J., Effects of a Stylus on the surface roughness determination in a contact method for paper and paperboard, Journal of Nordic Pulp and Paper Research 34(4):442-452 (2019). 10.1515/npprj-2019-0011
20
Moon, B. K., Analysis of surface structure characterization of cellulose-based materials using profilometry, Doctoral dissertation, Kookmin University, Korea (2021).
21
Jeong, H. S., The analysis of paper roughness using power spectrum technique, Master thesis, Kookmin University, Korea (2017).
22
Ko, Y. C., Park, J. M., and Shin, S. J., The principles of fractal geometry and its applications for pulp & paper industry, Journal of Korea TAPPI 47(4):177-186 (2015). 10.7584/ktappi.2015.47.4.177
23
Falconer, K., Fractal Geometry: Mathematical Foundations and Applications, 2nd ed., Wiley (2003). 10.1002/0470013850
24
Barnsley, M. F., Fractal Everywhere, New ed., p. 560, Dover Pub., Mineola, New York, USA (2012).
25
Russ, J. C., Fractal surfaces, Plenum Press, New York and London, p. 309 (1994). 10.1007/978-1-4899-2578-7
26
Mandelbrot, B., The fractal geometry of nature, Freeman, San Francisco, USA, p. 468 (1982).
27
Niemark, A. V., Determination of the surface fractal dimensionality from the results of an adsorption experiment, J. Physical Chemistry 64(10):1397-1403 (1990).
28
Lee, S. H., Kim, H. J., Ko, Y. C., Lee, J. H., Kim, H. W., Oh, Y. T., and Park, J. M., Correlation analysis between tissue creping and fractal dimension value, Journal of Korea TAPPI 50(4):77-81 (2018). 10.7584/JKTAPPI.2018.08.50.4.77
29
KS M 4057, Determination of stylus contact method of paper and board - Surface friction (2021).
30
KS M 4058, Determination of stylus contact method of paper and board - Surface roughness (2021).
31
Barns, R., Variogram tutorial, Golden software (2002).
32
Ko, Y. C., Melani, L., Park, N. Y., and Kim, H. J., Surface characterization of paper and paperboard using a stylus contact method, Nordic Pulp & Paper Research Journal 35(1):78-88 (2020). 10.1515/npprj-2019-0005
33
Constantine, A. G. and Hall, P., Characterizing surface smoothness via estimation of effective fractal dimension, Journal of the Royal Statistical Society. Series B (Methodological) 56(1):97-113 (1994). 10.1111/j.2517-6161.1994.tb01963.x
34
Kim, H. W., Oh, Y. T., Park, J. S., Kim, H. J., and Park, J. M., Analysis of handsheets formation and roughness according to the mixing ratio and beating time of Sw-BKP and Hw-BKP, Journal of Korea TAPPI 51(6):22-29 (2019). 10.7584/JKTAPPI.2019.12.51.6.22
35
Lee, Y. J., Kim, J. H., Cha, J. E., Kang, N. Y., and Kim, H. J., Analysis of surface characteristics of printing paper using contact profilometry, Journal of Korea TAPPI 55(2):48-58 (2023). 10.7584/JKTAPPI.2023.4.55.2.48
36
Park, N. Y., Ko, Y. C., Kim, H. J., and Moon, B. G., Surface characterization of paper products via a stylus-type contact method, Bioresources 16(3):5667-5678 (2023). 10.15376/biores.16.3.5667-5678
37
Moon, B. G., Park, N. Y., Ko, Y. C., and Kim, H. J., Characterization of paper surfaces by friction profilometry, Bioresources 17(4):6067-6078 (2022). 10.15376/biores.17.4.6067-6078
38
Lee, Y. J., Ko, Y. C., Moon, B. G., and Kim, H. J., The surface characterization of paper products by profilometry with a fractal dimension analysis, Bioresources 18(2):3978-3994 (2023). 10.15376/biores.18.2.3978-3994
Information
  • Publisher :Korea Technical Association of The Pulp and Paper Industry
  • Publisher(Ko) :한국펄프종이공학회
  • Journal Title :Journal of Korea TAPPI
  • Journal Title(Ko) :펄프종이기술
  • Volume : 55
  • No :6
  • Pages :48-58
  • Received Date : 2023-10-10
  • Revised Date : 2023-11-24
  • Accepted Date : 2023-11-27
  • DOI :https://doi.org/10.7584/JKTAPPI.2023.12.55.6.48
Journal Informaiton Journal of Korea TAPPI Journal of Korea TAPPI
Online Submission
  • scopus
  • NRF
  • KOFST
  • crossref crossmark
  • crossref cited-by
  • crosscheck
  • orcid
Journal Informaiton Journal Informaiton - close